Rising Kerb

The Parking Height Rising Kerb with SMT (Surface Mount Technology) is a surface mounted unit requiring minimal foundations, which has a lift height of 300mm and widths up to 3000mm.

Provides a simple solution and added security to sites where vandalism is a risk

100% duty rating – designed for continuous and frequent use. Power is supplied from a three phase 400V power supply as standard.

The Rising Kerb can be interfaced to any access control systems. Traffic Light System included as standard. It is recommended that the Rising Kerb’s hydraulic control cabinet is installed within 10metres of the kerb.

  • Lift Height options of 300mm
  • Maximum width: 3000mm

Rising Kerb Specifications

Features

The Rising Kerb

    Basic Specs

  • Rising Kerb
  • Lift height 300mm
  • Width: Variable up to 3000mm
  • More details

  • Construction: The blocking segment shall be constructed of heavy steel section with steel front plate and covers
  • Impact Test Data: 3T @ 15km/h, 5T @ 25km/h, 10T @ 30km/h
  • Finish: Shotblasted, hot zinc sprayed (galvanised), primed and finished with a final coat of polyurethane paint. Client to advise RAL paint number. Alternative finishes available on request. Frontier Pitts Special Lifetime Paint; an anti-slip paint for road vehicles available on request.
  • Accessories Included: Industrial hydraulic pump drive unit, Motor protection, Security lock on cabinet door, Instantly Reversible, Override Switch, Switched fused supply, Mains indicator lamp, Reinforced hoses for long service life, Long life hydraulic seals
  • Speed of operation: 3-6 seconds *This is subject to a risk assessment to ensure the automatic equipment complies to BS EN 12453Depending on configuration
  • Duty Cycle: 100% duty rating
  • Safety: Vehicle Detector Loops, Safety Photocells, LED Traffic light heads
  • Controls: The programmable logic controller (PLC) with built in safety features will accept inputs from access control systems including access card, voice, etc. Push button as supplied as standard
  • Accreditations: Secured by Design, BRE Global

Civil Engineering

300mm lift height

Parking Rising Kerb Foundations
Blocker Foundations
300mm lift Security Height Road Blocker Foundation
Total Width: Blocker Width + 200mm x W:3790mm x D:150mm
Note: Power and control wiring ducts to be incorporated into foundations.
Control Cabinet Foundations: 800mm SQ x D:300mm
For more information please contact the Technical Sales Department on

01293 422800 or email:

[email protected]

Electrical Engineering

Industry standard electricals

Electrical Requirements: Three Phase, Depending on configuration

Specifications subject to change and are dependant on product options. Please contact Frontier Pitts to request more information.

 

Photo Gallery

Accessories

Signage

Warning and information signs installed on the barrier boom such as ‘STOP’ ‘NO EXIT’ and ‘NO ENTRY’

Traffic Light System

Traffic Light systems are highly recommended to be installed with all road blocker and bollard systems to advise all users of its position. 100mm traffic light head can be pole or mounted on control cabinet

Lights in Blocker

Internal lights within the skirt of the road blocker for better visibility

Traffic Light Cage

Vandal resistant traffic light cages

Manual Handpump

In the event of a power failure, a hand pump/release can be provided to enable the manual raising and lowering of the blocker/bollard.

Vehicle Detector Loops

Vehicle detector loops installed beneath the road surface to detect vehicles. This will prevent the automatic equipment from closing on a vehicle within the aperture. Safety induction loops cut into the road surface. This will prevent the gate from closing on a vehicle within the aperture.

Safety Photocells

Safety Photocells produce beams of light which cross the road way to monitor vehicle and pedestrian movement. If an object breaks this beam, the automatic equipment will stop & reverse. On gate installations, two pairs of photocells are usually fitted. Ultra Sonic Sensors are also available.

Stainless Steel Cabinet

As standard, the road blockers/bollards control cabinet is shotblasted and finish with a final coat of polyurethane paint. However a Stainless Steel finish is also available as an option.
Subscribe to get the latest news about our products
We respect your privacy, we will not spam you.