Qwicket Gate

Frontier Pitts ‘Wicket’ Manual Pedestrian Gate

The Qwicket Pedestrian Gate is an automatic hinged/swing gate which provides safe access for pedestrians.

When it comes to controlling the flow of people, Frontier Pitts’ renowned quality comes to the fore in pedestrian gates. Whether required for security or safety reasons, our pedestrian gates have been proven to deliver reliable performance in installations around the world.

The motorised “Qwicket” (which can be operated by card reader, push-button, etc.) will open 90°, close and rebolt within a standard 15-second* operating cycle. It is ideal for secure sites, where personnel access needs to be restricted or controlled.

Like the Wicket Gate, the Qwicket is available in a wide range of styles to compliment both contemporary and traditional architectural designs. The Qwicket can also be custom-designed to match a company’s specific requirements and/or vehicle access gate.

  • Standard internal height: 2050mm
  • Standard gateleaf width: 750mm or 1000mm
  • Bespoke available

Pedestrian Qwicket Gate Specifications


The Pedestrian Qwicket Gates

    Basic Specs

  • Automatic Hinged/Swing Pedestrian Gate
  • Single Leaf Maximum width: 750mm or 1000mm
  • Standard height: 2400mm
  • Standard internal height: 2050mm
  • Bespoke available
  • More details

  • On receipt of a signal from a push-button, card reader etc, the Qwicket gateleaf unbolts and opens automatically by 90°, and then closes, rebolts and switches off in a standard 15-second* operating cycle
  • Construction: The gate leaf is a fully welded construction of rectangular hollow section, low carbon steel to BS4848 Pt.2.
  • Various security infills available including bar, security weldmesh, sheet, and bespoke such as wood and ornate.
  • 100 % Operating duty cycle – designed for continuous & frequent use.
  • Typical operating speeds dependent on automation type and configuration.
  • Hinged Gates Safety control systems: Safety photocells and safety edges are available.
  • Accessories: Signage, audible alarms and flashing beacons.
  • Hinged Gates Access controls: A wide range of access control systems are available.This is subject to a risk assessment to ensure the automatic equipment complies to BS EN 12453

Civil Engineering

Dependent on Automation, please see Actuator page.

Qwicket Pedestrian Gate Foundations
Gate leaf Foundation: L:1100mm x W:600mm x D:450mm
(Note: Power and control wiring ducts to be incorporated into foundations)
Dependent on Automation, please see Actuator page.(Note: Power and control wiring ducts to be incorporated into foundations)
For more information please contact the Technical Sales Department on

01293 422800 or email:

[email protected]

Electrical Engineering

Industry standard electricals

Electrical Requirements: Dependent on actuator and configuration

Specifications subject to change and are dependant on product options. Please contact Frontier Pitts to request more information.


Photo Gallery



Warning and information signs installed on the barrier boom such as ‘STOP’ ‘NO EXIT’ and ‘NO ENTRY’

Cowled Exit Switch

Exit buttons on pedestrian gates are usually cowled to prevent users reaching the button from the insecure side.

Pedestrian Gate Infills

Pedestrian Gates are fully welded with bar infill. Various infills are available including weldmesh, palisade pales, sheet and wood infills.

Hinged Gate Warning Signs

Indicates and warns users of the swing of a hinged gate during opening and closing.

Hydraulic Closer

The manual “Wicket” Gates security can be increased with a hydraulic closer or an electric closer, and a maglock. With this option a wide range of access control systems are available.

Pedestrian Gate Push Bar to open Emergency Exit

The Emergency Exit Pedestrian Gate fitted with a push bar to open. This high security single point locking push bar has an integrated electro mechanical/solenoid deadlock for use with access control systems. Automatic bolting upon door closure is fitted as standard. SATE override fitted allowing emergency escape at all times via internal push pad with instructions “push” at the point of use. The unit is fitted with a manual mechanical key override as standard.
Subscribe to get the latest news about our products
We respect your privacy, we will not spam you.