LPS 1175 Platinum Bi-folding Gate Top Guidance SR1, SR2 & SR3
Pictured here: LPS1175 SR2 Platinum Bi-folding Gate with sheet infill
The LPS1175 Security Rated Platinum Bi-folding Gate with top guidance is a fast acting security gate which is ideal for underground car parks and sites where there is a limited area for the gate to open and close. The gate has successfully withstood attack from forced entry to Security Rating 1 (A1) for 1 minute, Security Rating 2 (B3) for 3 minutes and Security Rating 3 (C5) for 5 minutes.
The LPS 1175 Bi-folding Gates overhead top track can be automated using Frontier Pitts designed Dutyman and Trojan Actuators.
Bi-folding Gates Safety control systems: Vehicle detector loops, safety photocells, ultra-sonic sensors and safety edges are available. Accessories: Signage, audible alarms and flashing beacons. For Gate Safety, please click here
Bi-folding Gates Access controls: A wide range of access control systems are available.
Please click here to view the choice of Security Rated Gate Infills
LPS 1175 Platinum Bi-folding Gate Top Guidance Specifications
LPS 1175 Platinum Bi-folding Gate Top Guidance
|Dependent on Actuator. For more information please contact the Technical Sales Department on
01293 422800 or email:
Industry standard electricals
|Electrical Requirements: Depending on Actuator and configuration
Specifications subject to change and are dependant on product options. Please contact Frontier Pitts to request more information.
|Warning and information signs are recommended to be installed with all automatic equipment to advise users of its operation
Bi-folding Gate Warning Sign
|Indicates and warns users of the swing of a bi-folding gate during opening and closing
Traffic Light System
|Traffic Light systems can be installed with Automatic Gate systems to advise all users of its position. 100mm traffic light head can be pole or mounted on control cabinet
Vehicle Detector Loops
|Vehicle detector loops installed beneath the road surface to detect vehicles. This will prevent the automatic equipment from closing on a vehicle within the aperture. Safety induction loops cut into the road surface. This will prevent the gate from closing on a vehicle within the aperture.
|Safety Photocells produce beams of light which cross the road way to monitor vehicle and pedestrian movement. If an object breaks this beam, the automatic equipment will stop & reverse. On gate installations, two pairs of photocells are usually fitted. Ultra Sonic Sensors are also available.
Gate Safety Edge
|Safety Edges are normally fitted to automatic gates. However they can also be installed beneath a barrier boom. Safety edges prevent the barrier lowering on a person or vehicle in the event it is activated. Safety edges are flexible strips which, if depressed, send a signal to the power source to stop.
Automatic Bi-folding Gates
|For Automatic Gates, safety accessories and devices, please view the Actuator product page.
Weldmesh should be clipped to the gates infill bars infill to prevent pedestrians putting their limbs through.
Other infills include palisade pales, sheet and wood infills. For more information please Security Gate Infills page
|Sounders/Audible Alarms provide an audible warning that the automatic equipment is in operation.
|Flashing Beacons provide a visual warning that the automatic equipment is in operation.