'Wicket' Manual Pedestrian Gate

Frontier Pitts ‘Wicket’ Manual Pedestrian Gate

The Wicket Pedestrian Gate is a manual hinged/swing gate which provides safe access for pedestrians. The Wicket Gate is available in a wide range of styles to compliment both contemporary and traditional architectural designs. The Wicket can also be custom-designed to match a company’s specific requirements and/or vehicle access gate.

The manual ‘Wicket’ gates security can be increased with a hydraulic closer or an electric closer, and a maglock. With this option, a wide range of access control systems are available.

Standard internal height: 2050mm
Standard gateleaf width: 750mm or 1000mm
Bespoke available

Contact Technical Sales

Pedestrian Wicket Gate Specifications

Features

The Pedestrian Wicket Gates

Basic Specs

Hinged/Swing Pedestrian Gate

Single Leaf Maximum width: 750mm or 1000mm

Standard height: 2400mm

Standard internal height: 2050mm

Bespoke available

More details

The manual ‘Wicket’ gates security can be increased with a hydraulic closer or an electric closer, and a maglock. With this option, a wide range of access control systems are available. The Wicket gate can be specified to open 180 degrees for disabled access

Construction: The gate leaf is a fully welded construction of rectangular hollow section, low carbon steel to BS4848 Pt.2. Infill – various infills available, including bar, solid sheet, weldmesh, etc. Standard bar infill: Vertical 50mm x 25mm ERW bar infill at approximately 180mm centres, backed by 8 gauge x 50mm square galvanised weld mesh, painted to match

Finish: Various options available, including: Shotblasted, hot zinc sprayed, primed & finished with a final coat of polyurethane paint. Alternatively, acid dipped then hot galvanized available on smaller gates.

Various security infills available including bar, security weldmesh, sheet, and bespoke such as wood and ornate.

Civil Engineering

Dependent on Automation, please see Actuator page.

Gate leaf foundations: L:1100mm x W:600mm x D:450mm
Dependent on Automation, please see Actuator page.(Note: Power and control wiring ducts to be incorporated into foundations)
For more information please contact the Technical Sales Department on

01293 422800 or email:

[email protected]

Specifications subject to change and are dependant on product options. Please contact Frontier Pitts to request more information.

Photo Gallery

Accessories

Signage	Warning and information signs installed on the barrier boom such as ‘STOP’ ‘NO EXIT’ and ‘NO ENTRY’
Cowled Exit Switch	Exit buttons on pedestrian gates are usually cowled to prevent users reaching the button from the insecure side.
Pedestrian Gate Infills	Pedestrian Gates are fully welded with bar infill. Various infills are available including weldmesh, palisade pales, sheet and wood infills.
Hinged Gate Warning Signs	Indicates and warns users of the swing of a hinged gate during opening and closing
Hydraulic Closer	The manual “Wicket” Gates security can be increased with a hydraulic closer or an electric closer, and a maglock. With this option a wide range of access control systems are available.
Pedestrian Gate Push Bar to open Emergency Exit	The Emergency Exit Pedestrian Gate fitted with a push bar to open. This high security single point locking push bar has an integrated electro mechanical/solenoid deadlock for use with access control systems. Automatic bolting upon door closure is fitted as standard. SATE override fitted allowing emergency escape at all times via internal push pad with instructions “push” at the point of use. The unit is fitted with a manual mechanical key override as standard.