Secured by Design Platinum Double Hinged Gate SR1, SR2 & SR3

LPS1175 Platinum Double leaf Hinged Gate SR2/SR3 Secured by Design

The Secured by Design LPS 1175 SR1 (A1), SR2 (B3) & SR3 (C5) Platinum Double Hinged Gate is a security gate which is ideal for sites where there is a limited area for the runback of a sliding gate. The gate has successfully withstood forcible attack to Security Rating 1 (A1) for 1 minute, Security Rating 2 (B3) for 3 minutes and Security Rating 3 (C5) for 5 minutes.

The Secured by Design LPS 1175 Hinged Gates are powered with either Dutyman or Trojan Actuators depending on the duty and size of gate.

Hinged Gates Safety control systems: Vehicle detector loops, safety photocells, ultra-sonic sensors and safety edges are available. Accessories: Signage, audible alarms and flashing beacons.

Hinged Gates Access controls: A wide range of access control systems are available.

Please click here to view the choice of Security Rated Gate Infills

Automatic Hinged Maximum width: 10,000mm
Standard height: 2400mm
Maximum height: 4000mm
Bespoke available
Secured by Design
Red book Listing

Contact Technical Sales

LPS1175 SR1 (A1), SR2 (B3) & SR3 (C5) Platinum Double Hinged Gate Specifications

Features

LPS1175 SR1 (A1), SR2 (B3) & SR3 (C5) Platinum Double Hinged Gate

Basic Specs

Automatic Hinged Gate Maximum width: 10,000mm

Standard height: 2400mm

Maximum height: 4000mm

Bespoke available

More details

Construction: The gate leaf is a fully welded construction of rectangular hollow section, low carbon steel to BS4848 Pt.2. Combination of vertical ERW bar infill backed with galvanised weld mesh, painted to match Standard colour range: Any colour in the RAL colour range

Shotblasted, hot zinc sprayed, primed & finished with a final coat of polyurethane paint. Client to advise RAL paint number. This process provides a 20-year corrosion protection system for exterior, industrial polluted inland sites to BS5493, 1977 (Revised 1984). Alternatively, acid dipped then hot galvanized available on smaller gates.

Safety: Safety-edges, Vehicle Detector Loops, Safety Photocells, LED Traffic ligh heads, Flashing beacon, Audible alarm

Duty Cycle: 100% duty rating

Controls: A wide range of access control systems are available.

Accreditations: Secured by Design, BRE Global

Civil Engineering

Dependent on Actuator. For more information please contact the Technical Sales Department on

01293 422800 or email:

[email protected]

Electrical Engineering

Industry standard electricals

Electrical Requirements: Depending on Actuator and configuration

Specifications subject to change and are dependant on product options. Please contact Frontier Pitts to request more information.

Product Video

Photo Gallery

Accessories

Signage	Warning and information signs are recommended to be installed with all automatic equipment to advise users of its operation
Hinged Gate Warning Sign	Indicates and warns users of the swing of a hinged gate during opening and closing
Traffic Light System	Traffic Light systems can be installed with Automatic Gate systems to advise all users of its position. 100mm traffic light head can be pole or mounted on control cabinet
Vehicle Detector Loops	Vehicle detector loops installed beneath the road surface to detect vehicles. This will prevent the automatic equipment from closing on a vehicle within the aperture. Safety induction loops cut into the road surface. This will prevent the gate from closing on a vehicle within the aperture.
Safety Photocells	Safety Photocells produce beams of light which cross the road way to monitor vehicle and pedestrian movement. If an object breaks this beam, the automatic equipment will stop & reverse. On gate installations, two pairs of photocells are usually fitted. Ultra Sonic Sensors are also available.
Gate Safety Edge	Safety Edges are normally fitted to automatic gates. However they can also be installed beneath a barrier boom. Safety edges prevent the barrier lowering on a person or vehicle in the event it is activated. Safety edges are flexible strips which, if depressed, send a signal to the power source to stop.
Automatic Hinged Gates	For Automatic Gates, safety accessories and devices, please view the Actuator product page.
Gate Infill	Weldmesh should be clipped to the gates infill bars infill to prevent pedestrians putting their limbs through. Other infills include palisade pales, sheet and wood infills. For more information please Security Gate Infills page
Sounder	Sounders/Audible Alarms provide an audible warning that the automatic equipment is in operation.
Flashing Beacon	Flashing Beacons provide a visual warning that the automatic equipment is in operation.