Jobs

Current Frontier Pitts Jobs & Vacancies Opportunities

To read the description toggle open / close the bars by clicking on them

For GDPR Policies, please click on the following:


ENGINEER JOBS

Role: Field Service Engineer

Middlesborough
South East, Kent & Sussex

Updated 22nd May 2024
Frontier Pitts welcomes applications from Electromechanical Field Service Engineers to aid in the installation, service and maintenance of our wide range of security equipment.  The exact location for these roles are flexible within the above areas. If you satisfy the following criteria please do apply by the below means.  

The successful applicant will have the following profile:

  • The ability to read electrical and mechanical drawings, although full training will be provided for our specific requirements.
  • A full driving license, preferably clean.
  • Be self motivated to work individually but adaptable to work as part of a team.
  • Able to communicate in a clear, concise, logical manner both verbally and written
  • Electrical and mechanical experience.
  • Fault finding, repair, installation and commissioning experience.
  • Ability to conduct site surveys.
  • Good customer service skills.

The applicant must:

  • Have a good level of fitness due to the physical demands of the job.
  • Be able to pass security clearances. Please do not apply if you have a criminal history as you will not pass the security clearances.
  • Have a flexible and positive outlook.
  • Be able to attend out of hours call outs.

Desirable attributes: The following qualities would be an advantage but are not essential. 

  • A working experience and qualification in 3 phase and 18th edition electrical.
  • Recognised Health and Safety training.
  • Welding experience and qualification.
  • Hydraulic, pneumatic or fluid system experience.
  • Previous experience with gates/barriers/blockers.

Further information

  • Some foreign travel may be available but not compulsory.
  • Generally this role is home based but some staying away will be required for this role. especially in the Northen Team.
  • Weekends and occasional night working will form part of this role.
  • This is a varied and interesting role and would suit a person who enjoys diversity in their working conditions. Working hours are based on a 40 hour week during normal office hours Monday – Friday, but working hours will be different on any given day. Overtime will be required at late notice and scheduled jobs will change on a day to day basis depending on client requirements. Working hours will not be predictable
  • Out of hours call outs will be a part of this role.
  • This position is primarily outside
  • Vehicle, uniform, PPE, mobile phone and tools will be provided.
  • Competitive salary.
  • Uncapped overtime structure.

Please send your CV and a covering letter highlighting relevant experience to [email protected].

No Agencies Please


PRODUCTION JOBS

Role: Saw Operator for Late Shift 14.00-22.00 (40hours per week)

Job description

Updated 4th June
An excellent opportunity has arisen for a Saw Operator based in Crawley, West Sussex, delivering security equipment throughout the UK. Basic Hours 39 per week, with overtime to meet customer specific requirements
To be considered for this role you need to have the following: –

  • You will be responsible for operating the band saw (training will be provided)
  • You will be cutting and operating the saw to specific measurements and requirements
  • You will be working with various materials cutting back these raw materials to the orders required
  • You will be a dedicated team player ensuring cohesive working with all the team and departments at all times
  • You will work to and comply with health and safety standards at all times
  • You will have experience of working in an engineering company
  • Working Hour Late Shift:
  • Monday to Friday – 14.00 to 22.00

Job Type: Permanent, Full time

Please send your CV and a covering letter highlighting relevant experience to [email protected]

Role: Fitters for Day Shift (40hours per week)

Job description

Updated 4th June
Due to our fast expanding business, Frontier Pitts is looking for multiple Fitters for our day shift (40hours per week) to be based at our Crawley HQ to work on high security Gates, Barriers, Bollard, Blockers and Turnstiles.

The Fitters are responsible for the final assembly of the Security Equipment in accordance to assembly drawings issued by the Drawing Office.

  • Collate materials required to complete Bespoke Product manufacture. This may involve unloading deliveries.
  • Assemble into a complete product in accordance to job specific specifications and drawings.
  • Ensure the aesthetics of the product remain of the highest quality for the client.
  • Use manual handling equipment where required.
  • Prepare equipment for factory acceptance testing and complete appropriate paper work

General Duties

  • You must be able to work under pressure and prioritise tasks
  • You must be able to work unsupervised and be self-motivated
  • A forklift license is an advantage.
  • Display a proactive attitude within the organisation with a culture of right first time and ownership of problems.
  • Recommend resources and training, to ensure that the organisation can meet future demands from its customers.
  • Clearly and concisely communicate with all levels of personnel
  • Experienced Fitter for day shift

If you think you have the skills to succeed in this role please forward a copy of a current CV with a covering letter or email to HR at [email protected]

Role: Fitters for Late Shift 14.00-22.00 (40hours per week)

Job description

Updated 4th June
Due to our fast expanding business, Frontier Pitts is looking for multiple Fitters for our late shift 14.00-22.00 (40hours per week) to be based at our Crawley HQ to work on high security Gates, Barriers, Bollard, Blockers and Turnstiles.

The Fitters are responsible for the final assembly of the Security Equipment in accordance to assembly drawings issued by the Drawing Office.

  • Collate materials required to complete Bespoke Product manufacture. This may involve unloading deliveries.
  • Assemble into a complete product in accordance to job specific specifications and drawings.
  • Ensure the aesthetics of the product remain of the highest quality for the client.
  • Use manual handling equipment where required.
  • Prepare equipment for factory acceptance testing and complete appropriate paper work

General Duties

  • You must be able to work under pressure and prioritise tasks
  • You must be able to work unsupervised and be self-motivated
  • A forklift license is an advantage.
  • Display a proactive attitude within the organisation with a culture of right first time and ownership of problems.
  • Recommend resources and training, to ensure that the organisation can meet future demands from its customers.
  • Clearly and concisely communicate with all levels of personnel
  • Experienced Fitter for evening shift
  • Working Hour Late Shift:
  • Monday to Friday – 14.00 to 22.00

If you think you have the skills to succeed in this role please forward a copy of a current CV with a covering letter or email to HR at [email protected]

Role: Fabricator/Welder

Job description

Updated 4th June
Frontier Pitts is looking for a Fabricator Welder to be based at our Crawley HQ.

Responsibilities

  • Working from drawings manufacture high security products. You will be given the relevant parts and drawings, and will work as part of a team to complete the product to customer specifications, alerting the supervisor to any issues.
  • Ability to manufacture to a high standard
  • High attention to detail and ability to inspect own work
  • Maintain high standards of housekeeping within the workplace.

Essential Skills
Previous experience in Mig, Tig & Arc welding is essential

Must be able to work from detailed drawings and have experience in working in an engineering environment.

Must have a methodical approach to tasks.

Please send your CV and a covering letter highlighting relevant experience to HR at [email protected] or Frontier Pitts, Crompton House, Crompton Way, Crawley, RH10 9QZ.

Role: Fabricator/Welder – 14.00 to 0.00

Job description


Updated 4th June
Frontier Pitts is looking for a Fabricator Welder to be based at our Crawley HQ.

Responsibilities

  • Working from drawings manufacture high security products. You will be given the relevant parts and drawings, and will work as part of a team to complete the product to customer specifications, alerting the supervisor to any issues.
  • Ability to manufacture to a high standard
  • High attention to detail and ability to inspect own work
  • Maintain high standards of housekeeping within the workplace.

Previous experience in Mig, Tig & Arc welding is essential

Must be able to work from detailed drawings and have experience in working in an engineering environment.

Must have a methodical approach to tasks.

Please send your CV and a covering letter highlighting relevant experience to HR at [email protected] or Frontier Pitts, Crompton House, Crompton Way, Crawley, RH10 9QZ.

SERVICE JOBS

Role: Site Operations Administrator

Job description

Posted 4th June 2024

The Site Operations Admin employee is responsible for looking after day-to-day field service administration for the Engineer Team. Full training will be given.

Duties include but are not limited to –

  • Van stocks/booking out consumables
  • Timesheets
  • New starter paperwork
  • Filing paperwork i.e. van paperwork/engineer certificates
  • Preparing certificates for internal training courses and filing
  • Booking in training courses and updating the training matrix
  • Answering inbound calls and emails
  • Providing cover for other administration staff
  • Raising purchase requisitions to the purchasing department
  • Booking in vehicle repairs, MOT’s, services
  • Engineer security clearances
  • Ordering engineer tools
  • Assisting with paperwork/checklists for engineers annual reviews
  • Ad hoc duties as required.

This candidate will also be asked to help the team cover Maternity leave for the Spare Parts Coordinator. This is due to commence (currently) as of October 2024 and run for a period of 9-12 months (exact length of time TBC). Duties will then be reallocated when the maternity cover ends so will remain as full time.
 
The Service Co-Ordinator for Spare Parts is responsible for looking after day-to-day administration for the Spare Parts Department.
Duties include but are not limited to –

  • Quoting for spare parts
  • Processing spares orders
  • Invoicing spares orders
  • Management of the dedicated Spares email address
  • Co-ordinating with accounts and clients to clear up overdue invoices
  • Raising purchase requisitions to the purchasing department
  • Post duty for main office
  • Ad hoc duties as required

Job Specification
Essential –

  • Good literacy and numeracy skills
  • Excellent communication skills – written and verbal
  • Computer literate
  • The ability to work within a high-pressure environment
  • Good administrative skills
  • Previous customer service experience
  • Take the initiative with day-to-day responsibilities

Competencies –

  • Dedication and commitment
  • Team player
  • Good time management
  • Personable
  • Ability to deal with changeFlexible and reliable

Please send your CV and a covering letter highlighting relevant experience to [email protected]
***NO AGENCIES PLEASE***

STORES JOBS

Role: Materials Control Planning Assistant

Job description

Updated 3rd March
We are now seeking a Materials Control Planning Assistant to join the team to assist setting up new procedures and a BOM system.
 
PRINCIPLE ACCOUNTABILITIES

  • Ensure all items required for projects are available for production at the time required
  • By

  • Timely allocations of stock
  • Timely purchase requisitions for non stock items
  • Liaise with electrical and mechanical design to ensure all parts are catered for when required
  • Monitoring the arrival of long lead time items and purchase orders for special goods

Key Skills

  • Ability to read competently – electrical, mechanical and hydraulic drawings
  • Microsoft Office skills essential (Word, Excel, and Outlook)
  • Excellent communication skills, both written and verbal
  • Have a basic understanding of the importance of time management and effective record keeping
  • Flexible enough to amend direction when required, but rigid enough to maintain processes

The working hours are 9.00 – 5.30pm.

Please send your CV and a covering letter highlighting relevant experience to [email protected]
***NO AGENCIES PLEASE***




Subscribe to get the latest news about our products
We respect your privacy, we will not spam you.