Automatic Barrier model FBA - max 5.5m boom

Finish The cabinet is protected by a finish system comprising; de-greasing, shot blasting to clean metal, zinc rich powder prime and polyester powder coat. Boom – Aluminium, Powder Coated, White with red bands. Special colours available.

Safety: Signs, Vehicle detector loop systems, safety photocells

Controls: The programmable logic controller (PLC) with built in safety features will accept inputs from access control systems including access card, voice, etc. Push button as supplied as standard

Operating Speed: 3.5-7 seconds, dependent upon boom length, motor and skirt options

Civil Engineering

Barrier Foundations: 600mm2 x 450mm deep.
Fixed end rest foundations: 400mm2 x 300mm deep.
Note: Power and control wiring ducts to be incorporated into foundations.
For more information please contact the Technical Sales Department on

01293 422800 or email:

[email protected]

Electrical Engineering

Industry standard electricals

Electrical Requirements 6 amp, 3 wire, 230v, 50hz, single phase supply.
Depending on configuration
Only single phase supply required
Override switch inside cabinet
Switched fuse supply double pole insulator
Easy accessible fuse unit

Specifications subject to change and are dependant on product options. Please contact Frontier Pitts to request more information.

Photo Gallery

Accessories

Barrier Signage	Warning and information signs installed on the barrier boom such as ‘STOP’ ‘NO EXIT’ and ‘NO ENTRY’
Pedestrian Warning Sign	Normally placed on the barrier cabinet. Warns pedestrian of the automatic barrier.
Fixed End Rest	Frontier Pitts recommends an end rest for barriers with booms over 4 metres. Fixed end rests are bolted to the ground and require a foundation base of 400mm SQ x 300mm deep.
Vehicle Detector Loops	Vehicle detector loops installed beneath the road surface to detect vehicles. This will prevent the automatic equipment from closing on a vehicle within the aperture. Safety induction loops cut into the road surface. This will prevent the gate from closing on a vehicle within the aperture.
Safety Photocells	Safety Photocells produce beams of light which cross the road way to monitor vehicle and pedestrian movement. If an object breaks this beam, the automatic equipment will stop & reverse. On gate installations, two pairs of photocells are usually fitted. Ultra Sonic Sensors are also available.