PAS 68 Terra Sliding Cantilevered Gate
PAS 68 – 7.5t @ 50mph
The PAS 68 and CEN 16221 Terra Sliding Cantilevered Gate, successfully impact tested with a 7.5t vehicle travelling at 50mph (80kph) which equates to 1852kJ. On impact, the gate stopped the vehicle within the aperture.
The gate leaf is constructed with a Heavy Duty Crash Impact Beam and Heavy duty posts support the gate leaf. The Cantilevered Gate, requires no track or support across the roadway, therefore no roadway excavation needed. The balance is provided by a unique enclosed “runback”, which enables the gate to be fully projected across the roadway without tipping
Electronically controlled motor drive unit. Designed for ease of installation and maintenance.
The Terra Sliding Cantilevered Gate can be interfaced to any access control systems.
Foundation Type B – Shallow embedment depths of only 400mm required (foundation depths of only 500mm required)
- Maximum width: 6000mm
- Variable heights available up to 5000mm
- (standard 2400mm) minimum height 1200mm
- PAS 68 Tested dimensions : width 4500mm
height 3000mm
The Terra Sliding Cantilevered Gate is a PSSA Verified product. The Perimeter Security Suppliers Association has introduced a verification scheme to provide confidence to clients of the perimeter security industry and ensure that the associations members conform to internationally recognised quality standards. For more information please click here.
PAS 68 Terra Sliding Cantilevered Gate 7.5t@50mph/80kph Specifications
FeaturesThe PAS 68 Terra Sliding Cantilevered Gate 7.5t@50mph/80kph |
Basic Specs
More details
|
Civil EngineeringFoundation Depths of only 500mm |
For more information please contact the Technical Sales Department on
01293 422800 or email: |
Electrical EngineeringIndustry standard electricals |
Electrical Engineering Industry standard electricals Electrical Requirements 6amp, three phase, 5wire neutral, earth or 6amp, single phase Depending on configuration |
Specifications subject to change and are dependant on product options. Please contact Frontier Pitts to request more information.
Product Video
Photo Gallery
Accessories
Signage |
Warning and information signs installed on the barrier boom such as ‘STOP’ ‘NO EXIT’ and ‘NO ENTRY’ |
Pedestrian Warning Sign |
Normally placed on the barrier cabinet. Warns pedestrian of the automatic barrier. |
|
Traffic Light systems are highly recommended to be installed with all road blocker and bollard systems to advise all users of its position. 100mm traffic light head can be pole or mounted on control cabinet |
Vehicle Detector Loops |
Vehicle detector loops installed beneath the road surface to detect vehicles. This will prevent the automatic equipment from closing on a vehicle within the aperture. Safety induction loops cut into the road surface. This will prevent the gate from closing on a vehicle within the aperture. |
Safety Photocells |
Safety Photocells produce beams of light which cross the road way to monitor vehicle and pedestrian movement. If an object breaks this beam, the automatic equipment will stop & reverse. On gate installations, two pairs of photocells are usually fitted. Ultra Sonic Sensors are also available. |
Gate Safety Edge |
Safety Edges are normally fitted to automatic gates. However they can also be installed beneath a barrier boom. Safety edges prevent the barrier lowering on a person or vehicle in the event it is activated. Safety edges are flexible strips which, if depressed, send a signal to the power source to stop. |
Pedestrian Guard Rail |
A Pedestrian Guard Rail (fence panels) should be fitted around the runback area of the sliding gate. This is to prevent serious injury to a person should they stray into that area whilst the gate is operating. |
Gate Infill |
Weldmesh should be clipped to the gates infill bars infill to prevent pedestrians putting their limbs through. Other infills include palisade pales, sheet and wood infills. For more information please Security Gate Infills page |
Sounder |
Sounders/Audible Alarms provide an audible warning that the automatic equipment is in operation. |
Flashing Beacon |
Flashing Beacons provide a visual warning that the automatic equipment is in operation. |
UPS – Uninterrupted Power Supply |
In the event of a power failure or sabotage an interrupted power supply system can open and close the Terra Gate for a number of predetermined operations is available. |
Extra Fast Operation |
Increases the products speed of operation to a few seconds. Dependent on configuration. Please contact Technical Sales for more information on 01293 422800 |
High Security Cabinet |
Provides high security protection to the control cabinet of Frontier Pitts PAS 68 Anti Terra product range. Special Security cabinets can be fitted and tested to BRE 1175 with 6 point security locking mechanism and fire resistance to DIN 4102. High security mauer key lock, Class A, ECBS/ENV 1300 approved, with similar rating to BS EN 1143-1 1997. |
High Security Cabinet |
Provides high security protection to the control cabinet of Frontier Pitts PAS 68 Anti Terra product range has been approved to Security Rating 2. Special Security cabinets can be fitted and tested to BRE 1175 with 6 point security locking mechanism and fire resistance to DIN 4102. High security mauer key lock, Class A, ECBS/ENV 1300 approved, with similar rating to BS EN 1143-1 1997. |
Traffic Light System