Warning and information signs installed on the barrier boom such as ‘STOP’ ‘NO EXIT’ and ‘NO ENTRY’
Pedestrian Warning Sign
Normally placed on the barrier cabinet. Warns pedestrian of the automatic barrier.
Traffic Light System
Standard Traffic Light systems are highly recommended to be installed with all road blocker and bollard systems to advise all users of its position, and are supplied as standard. 100mm traffic light head can be pole or mounted on control cabinet
Vehicle Detector Loops
Vehicle detector loops installed beneath the road surface to detect vehicles. This will prevent the automatic equipment from closing on a vehicle within the aperture. Safety induction loops cut into the road surface. This will prevent the gate from closing on a vehicle within the aperture.
Safety Photocells
Safety Photocells produce beams of light which cross the road way to monitor vehicle and pedestrian movement. If an object breaks this beam, the automatic equipment will stop & reverse. On gate installations, two pairs of photocells are usually fitted. Ultra Sonic Sensors are also available.
Gate Safety Edge
Safety Edges are normally fitted to automatic gates. However they can also be installed beneath a barrier boom. Safety edges prevent the barrier lowering on a person or vehicle in the event it is activated. Safety edges are flexible strips which, if depressed, send a signal to the power source to stop.
Pedestrian Guard Rail
A Pedestrian Guard Rail (fence panels) should be fitted around the runback area of the sliding gate. This is to prevent serious injury to a person should they stray into that area whilst the gate is operating.
Gate Infill
Weldmesh should be clipped to the gates infill bars infill to prevent pedestrians putting their limbs through.
Other infills include palisade pales, sheet and wood infills. For more information please Security Gate Infills page
Sounder
Sounders/Audible Alarms provide an audible warning that the automatic equipment is in operation.
Flashing Beacon
Flashing Beacons provide a visual warning that the automatic equipment is in operation.
UPS – Uninterrupted Power Supply
In the event of a power failure or sabotage an interrupted power supply system can open and close the Terra Gate for a number of predetermined operations is available.
Extra Fast Operation
Increases the products speed of operation to a few seconds. Dependent on configuration. Please contact Technical Sales for more information on 01293 422800
High Security Cabinet
Provides high security protection to the control cabinet of Frontier Pitts PAS 68 Anti Terra product range. Special Security cabinets can be fitted and tested to BRE 1175 with 6 point security locking mechanism and fire resistance to DIN 4102. High security mauer key lock, Class A, ECBS/ENV 1300 approved, with similar rating to BS EN 1143-1 1997.
High Security Cabinet
Provides high security protection to the control cabinet of Frontier Pitts PAS 68 Anti Terra product range has been approved to Security Rating 2. Special Security cabinets can be fitted and tested to BRE 1175 with 6 point security locking mechanism and fire resistance to DIN 4102. High security mauer key lock, Class A, ECBS/ENV 1300 approved, with similar rating to BS EN 1143-1 1997.
Automatic Hinged Gate Accessories
Signage
Warning and information signs are recommended to be installed with all automatic equipment to advise users of its operation
Hinged Gate Warning Sign
Indicates and warns users of the swing of a hinged gate during opening and closing
Traffic Light System
Traffic Light systems can be installed with Automatic Gate systems to advise all users of its position. 100mm traffic light head can be pole or mounted on control cabinet
Vehicle Detector Loops
Vehicle detector loops installed beneath the road surface to detect vehicles. This will prevent the automatic equipment from closing on a vehicle within the aperture. Safety induction loops cut into the road surface. This will prevent the gate from closing on a vehicle within the aperture.
Safety Photocells
Safety Photocells produce beams of light which cross the road way to monitor vehicle and pedestrian movement. If an object breaks this beam, the automatic equipment will stop & reverse. On gate installations, two pairs of photocells are usually fitted. Ultra Sonic Sensors are also available.
Gate Safety Edge
Safety Edges are normally fitted to automatic gates. However they can also be installed beneath a barrier boom. Safety edges prevent the barrier lowering on a person or vehicle in the event it is activated. Safety edges are flexible strips which, if depressed, send a signal to the power source to stop.
Weldmesh should be clipped to the gates infill bars infill to prevent pedestrians putting their limbs through.
Other infills include palisade pales, sheet and wood infills. For more information please Security Gate Infills page
Sounder
Sounders/Audible Alarms provide an audible warning that the automatic equipment is in operation.
Flashing Beacon
Flashing Beacons provide a visual warning that the automatic equipment is in operation.
Automatic Barrier Accessories
Barrier Signage
Warning and information signs installed on the barrier boom such as ‘STOP’ ‘NO EXIT’ and ‘NO ENTRY’
HGV Signage
Warning and information signs installed on the barrier boom at a height more visible to HGV users.
Pedestrian Warning Sign
Normally placed on the barrier cabinet. Warns pedestrian of the automatic barrier.
Customise Your Barrier
Frontier Pitts takes customising your Automatic Barrier to the next level. As Automatic Barrier on your car park is likely to be the first opportunity that visitors to your premises will see, the traffic control system is a good opportunity for branding and free advertising.
Fixed End Rest
Frontier Pitts recommends an end rest for barriers with booms over 4 metres. Fixed end rests are bolted to the ground and require a foundation base of 400mm SQ x 300mm deep.
Pogo Stick End Rest
Pogo Stick End Rests are attached to the end of the barrier boom. The end rest will raise and fold against the boom. Ideal bi-parting barrier installations.
Maglock
For added security the maglock is installed on the fixed end rests and will reduce possible vandalism
Boom Lights
LED lights installed on the barrier boom to highlight the barrier boom
Special Colour
Barriers are manufactured as standard in white with a red chevron. Special colours are available to suit a company’s individual corporate theme.
Stainless Steel Finish
As standard, the barriers cabinet is shotblasted and finish with a final coat of polyurethane paint. However a Stainless Steel finish is also available as an option. Advisable for sites located on the coast
Lower Folding Skirt
Lower folding skirts are installed beneath the barrier boom. As the barrier boom rises, the skirt folds towards the boom. Provides an extra visual deterrent.
Full Height Swivel Skirt
Skirts installed above and below the boom. As the barrier boom rises, the skirt folds towards the boom. Full height swivel skirts provide the speed and flexibility of a rising arm barrier, and the deterrent of a gate, but at a much lower cost.
Articulated Boom
Recommended for entrances/exits with limited height clearance. Ideal for multi storey car parks.
Traffic Light System
Traffic Light systems are highly recommended to be installed with all road blocker and bollard systems to advise all users of its position. 100mm traffic light head can be pole or mounted on control cabinet
Traffic Light Full Sign System
Safety light signals and Car Park ‘FULL’ signs.
Vehicle Detector Loops
Vehicle detector loops installed beneath the road surface to detect vehicles. This will prevent the automatic equipment from closing on a vehicle within the aperture. Safety induction loops cut into the road surface. This will prevent the gate from closing on a vehicle within the aperture.
Safety Photocells
Safety Photocells produce beams of light which cross the road way to monitor vehicle and pedestrian movement. If an object breaks this beam, the automatic equipment will stop & reverse. On gate installations, two pairs of photocells are usually fitted. Ultra Sonic Sensors are also available.
Barrier Safety Edge
Safety Edges are normally fitted to automatic gates. However they can also be installed beneath a barrier boom. Safety edges prevent the barrier lowering on a person or vehicle in the event it is activated. Safety edges are flexible strips which, if depressed, send a signal to the power source to stop.
Wig Wag Lights
‘Wig Wag’ Traffic Light systems are highly recommended to be installed with automatic barriers at rail way level crossings. The lights will flash to annouce a warning.
Road Blocker Accessories
Signage
Warning and information signs installed on the barrier boom such as ‘STOP’ ‘NO EXIT’ and ‘NO ENTRY’
Traffic Light System
Standard Traffic Light systems are highly recommended to be installed with all road blocker and bollard systems to advise all users of its position, and are supplied as standard. 100mm LED traffic light head can be pole or mounted on control cabinet
Lights in Blocker
Internal lights within the skirt of the road blocker for better visibility
Traffic Light Cage
Vandal resistant traffic light cages
Totem Traffic Light System
Totem Traffic Light systems are optional and an upgrade to the standard Traffic Light system. Traffic Lights are highly recommended to be installed with all road blocker and bollard systems to advise all users of its position.
Manual Handpump
In the event of a power failure, a hand pump/release can be provided to enable the manual raising and lowering of the blocker/bollard.
Vehicle Detector Loops
Vehicle detector loops installed beneath the road surface to detect vehicles. This will prevent the automatic equipment from closing on a vehicle within the aperture. Safety induction loops cut into the road surface. This will prevent the gate from closing on a vehicle within the aperture.
Safety Photocells
Safety Photocells produce beams of light which cross the road way to monitor vehicle and pedestrian movement. If an object breaks this beam, the automatic equipment will stop & reverse. On gate installations, two pairs of photocells are usually fitted. Ultra Sonic Sensors are also available.
Stainless Steel Cabinet
As standard, the road blockers/bollards control cabinet is shotblasted and finish with a final coat of polyurethane paint. However a Stainless Steel finish is also available as an option.
iBollard Accessories
Signage
Warning and information signs installed on the barrier boom such as ‘STOP’ ‘NO EXIT’ and ‘NO ENTRY’
Traffic Light System
Standard Traffic Light systems are highly recommended to be installed with all road blocker and bollard systems to advise all users of its position, and are supplied as standard. 100mm LED traffic light head can be pole or mounted on control cabinet
Traffic Light Cage
Vandal resistant traffic light cages
Totem Traffic Light System
Totem Traffic Light systems are optional and an upgrade to the standard Traffic Light system. Traffic Lights are highly recommended to be installed with all road blocker and bollard systems to advise all users of its position.
Manual Handpump
In the event of a power failure, a hand pump/release can be provided to enable the manual raising and lowering of the blocker/bollard.
Hand drill to operate manual hand pump
Hand drill to operate manual hand pump on a Rising Terra Bollard.
Vehicle Detector Loops
Vehicle detector loops installed beneath the road surface to detect vehicles. This will prevent the automatic equipment from closing on a vehicle within the aperture. Safety induction loops cut into the road surface. This will prevent the gate from closing on a vehicle within the aperture.
Safety Photocells
Safety Photocells produce beams of light which cross the road way to monitor vehicle and pedestrian movement. If an object breaks this beam, the automatic equipment will stop & reverse. On gate installations, two pairs of photocells are usually fitted. Ultra Sonic Sensors are also available.
High Security Cabinet
Provides high security protection to the control cabinet of Frontier Pitts IWA14 & PAS 68 Anti Terra product range. Special Security cabinets can be fitted and tested to BRE 1175 with 6 point security locking mechanism and fire resistance to DIN 4102. High security mauer key lock, Class A, ECBS/ENV 1300 approved, with similar rating to BS EN 1143-1 1997.
Stainless Steel Cabinet
As standard, the road blockers/bollards control cabinet is shotblasted and finish with a final coat of polyurethane paint. However a Stainless Steel finish is also available as an option.
Turnstile Accessories
Signage
Warning and information signs installed on the barrier boom such as ‘STOP’ ‘NO EXIT’ and ‘NO ENTRY’
Turnstile Special Colour Finish
Turnstiles can be finish in clients choice of RAL colour. Frontier Pitts are able to suit a company’s individual corporate theme, even down to different colour rotors.
Turnstile Lights
Lights available in the lid of the turnstile
Cowled Switch
Exit buttons on pedestrian gates are usually cowled to prevent users reaching the button from the insecure side.
Pedestrian Guard Rail
A Pedestrian Guard Rail (fence panels) should be fitted around the runback area of the sliding gate. This is to prevent serious injury to a person should they stray into that area whilst the gate is operating.
GRP Lid
Glass Reinforced Plastic Lid for full height turnstiles
Trombone Rotor
Trombone rotors are available as an alternative to bar rotors
Terra Barrier Accessories
Barrier Signage
Warning and information signs installed on the barrier boom such as ‘STOP’ ‘NO EXIT’ and ‘NO ENTRY’
Terra Barrier Beam lights
Lights and signs fitted to a Terra Barrier crash beam
Traffic Light System
Traffic Light systems can be installed with the Terra Barrier systems to advise all users of its position. 100mm traffic light head can be pole or mounted on control cabinet
Extra Fast Operation
Increases the product lowreing speed of operation to a few seconds. Dependent on configuration. Please contact Technical Sales for more information on 01293 422800
Vehicle Detector Loops
Vehicle detector loops installed beneath the road surface to detect vehicles. This will prevent the automatic equipment from closing on a vehicle within the aperture. Safety induction loops cut into the road surface. This will prevent the gate from closing on a vehicle within the aperture.
Safety Photocells
Safety Photocells produce beams of light which cross the road way to monitor vehicle and pedestrian movement. If an object breaks this beam, the automatic equipment will stop & reverse. On gate installations, two pairs of photocells are usually fitted. Ultra Sonic Sensors are also available.
Barrier Safety Edge
Safety Edges are normally fitted to automatic gates. However they can also be installed beneath a barrier boom. Safety edges prevent the barrier lowering on a person or vehicle in the event it is activated. Safety edges are flexible strips which, if depressed, send a signal to the power source to stop.
Manual Hand pump
In the event of a power failure, a hand pump/release can be provided to enable the manual raising and lowering of the barrier.
High Security Cabinet
Provides high security protection to the control cabinet of Frontier Pitts PAS 68 Anti Terra product range. Special Security cabinets can be fitted and tested to BRE 1175 with 6 point security locking mechanism and fire resistance to DIN 4102. High security mauer key lock, Class A, ECBS/ENV 1300 approved, with similar rating to BS EN 1143-1 1997.
Terra Barrier Swivel Skirt
Skirts installed above and below the Terra Beam. As the barrier beam rises, the skirt folds towards the beam. Full height swivel skirts provide an extra visual deterrent.
Terra Sliding Gate Accessories
Signage
Warning and information signs installed on the barrier boom such as ‘STOP’ ‘NO EXIT’ and ‘NO ENTRY’
Pedestrian Warning Sign
Normally placed on the barrier cabinet. Warns pedestrian of the automatic barrier.
Traffic Light System
Traffic Light systems are highly recommended to be installed with all road blocker and bollard systems to advise all users of its position. 100mm traffic light head can be pole or mounted on control cabinet
Vehicle Detector Loops
Vehicle detector loops installed beneath the road surface to detect vehicles. This will prevent the automatic equipment from closing on a vehicle within the aperture. Safety induction loops cut into the road surface. This will prevent the gate from closing on a vehicle within the aperture.
Safety Photocells
Safety Photocells produce beams of light which cross the road way to monitor vehicle and pedestrian movement. If an object breaks this beam, the automatic equipment will stop & reverse. On gate installations, two pairs of photocells are usually fitted. Ultra Sonic Sensors are also available.
Gate Safety Edge
Safety Edges are normally fitted to automatic gates. However they can also be installed beneath a barrier boom. Safety edges prevent the barrier lowering on a person or vehicle in the event it is activated. Safety edges are flexible strips which, if depressed, send a signal to the power source to stop.
Pedestrian Guard Rail
A Pedestrian Guard Rail (fence panels) should be fitted around the runback area of the sliding gate. This is to prevent serious injury to a person should they stray into that area whilst the gate is operating.
Gate Infill
Weldmesh should be clipped to the gates infill bars infill to prevent pedestrians putting their limbs through.
Other infills include palisade pales, sheet and wood infills. For more information please Security Gate Infills page
Sounder
Sounders/Audible Alarms provide an audible warning that the automatic equipment is in operation.
Flashing Beacon
Flashing Beacons provide a visual warning that the automatic equipment is in operation.
UPS – Uninterrupted Power Supply
In the event of a power failure or sabotage an interrupted power supply system can open and close the Terra Gate for a number of predetermined operations is available.
Extra Fast Operation
Increases the products speed of operation to a few seconds. Dependent on configuration. Please contact Technical Sales for more information on 01293 422800
High Security Cabinet
Provides high security protection to the control cabinet of Frontier Pitts PAS 68 Anti Terra product range. Special Security cabinets can be fitted and tested to BRE 1175 with 6 point security locking mechanism and fire resistance to DIN 4102. High security mauer key lock, Class A, ECBS/ENV 1300 approved, with similar rating to BS EN 1143-1 1997.
High Security Cabinet
Provides high security protection to the control cabinet of Frontier Pitts PAS 68 Anti Terra product range has been approved to Security Rating 2. Special Security cabinets can be fitted and tested to BRE 1175 with 6 point security locking mechanism and fire resistance to DIN 4102. High security mauer key lock, Class A, ECBS/ENV 1300 approved, with similar rating to BS EN 1143-1 1997.
Terra Hinged Gate Accessories
Signage
Warning and information signs are recommended to be installed with all automatic equipment to advise users of its operation
Hinged Gate Warning Sign
Indicates and warns users of the swing of a hinged gate during opening and closing
Traffic Light System
Traffic Light systems can be installed with Automatic Gate systems to advise all users of its position. 100mm traffic light head can be pole or mounted on control cabinet
Vehicle Detector Loops
Vehicle detector loops installed beneath the road surface to detect vehicles. This will prevent the automatic equipment from closing on a vehicle within the aperture. Safety induction loops cut into the road surface. This will prevent the gate from closing on a vehicle within the aperture.
Safety Photocells
Safety Photocells produce beams of light which cross the road way to monitor vehicle and pedestrian movement. If an object breaks this beam, the automatic equipment will stop & reverse. On gate installations, two pairs of photocells are usually fitted. Ultra Sonic Sensors are also available.
Gate Safety Edge
Safety Edges are normally fitted to automatic gates. However they can also be installed beneath a barrier boom. Safety edges prevent the barrier lowering on a person or vehicle in the event it is activated. Safety edges are flexible strips which, if depressed, send a signal to the power source to stop.
Weldmesh should be clipped to the gates infill bars infill to prevent pedestrians putting their limbs through.
Other infills include palisade pales, sheet and wood infills. For more information please Security Gate Infills page
Sounder
Sounders/Audible Alarms provide an audible warning that the automatic equipment is in operation.
Flashing Beacon
Flashing Beacons provide a visual warning that the automatic equipment is in operation.
Terra Blocker Accessories
Signage
Warning and information signs installed on the barrier boom such as ‘STOP’ ‘NO EXIT’ and ‘NO ENTRY’
Traffic Light System
Standard Traffic Light systems are highly recommended to be installed with all road blocker and bollard systems to advise all users of its position, and are supplied as standard. 100mm traffic light head can be pole or mounted on control cabinet
Lights in Blocker
Internal lights within the skirt of the road blocker for better visibility
Traffic Light Cage
Vandal resistant traffic light cages
Totem Traffic Light System
Totem Traffic Light systems are optional and an upgrade to the standard Traffic Light system. Traffic Lights are highly recommended to be installed with all road blocker and bollard systems to advise all users of its position.
Accumulator
In the event of a power failure or sabotage, the accumulator can raise and lower the blocker/bollard for a number of predetermined operations. An accumulator is a self contained charged unit with battery backed control system.
Extra Fast Operation
Increases the products speed of operation to a few seconds. Dependent on configuration. Please contact Technical Sales for more information on 01293 422800
Manual Handpump
In the event of a power failure, a hand pump/release can be provided to enable the manual raising and lowering of the blocker/bollard.
Hand drill to operate manual hand pump
Hand drill to operate manual hand pump on a Rising Terra Bollard or Terra Blocker.
Vehicle Detector Loops
Vehicle detector loops installed beneath the road surface to detect vehicles. This will prevent the automatic equipment from closing on a vehicle within the aperture. Safety induction loops cut into the road surface. This will prevent the gate from closing on a vehicle within the aperture.
Safety Photocells
Safety Photocells produce beams of light which cross the road way to monitor vehicle and pedestrian movement. If an object breaks this beam, the automatic equipment will stop & reverse. On gate installations, two pairs of photocells are usually fitted. Ultra Sonic Sensors are also available.
High Security Cabinet
Provides high security protection to the control cabinet of Frontier Pitts PAS 68 Anti Terra product range. Special Security cabinets can be fitted and tested to BRE 1175 with 6 point security locking mechanism and fire resistance to DIN 4102. High security mauer key lock, Class A, ECBS/ENV 1300 approved, with similar rating to BS EN 1143-1 1997.
Anti Skid Paint
The Terra Blocker’s Top Plate can be fully coated with an anti skid resistant treatment which has been fully tested under laboratory conditions for at least 12 months
Rising Terra Bollard Accessories
Signage
Warning and information signs installed on the barrier boom such as ‘STOP’ ‘NO EXIT’ and ‘NO ENTRY’
Traffic Light System
Standard Traffic Light systems are highly recommended to be installed with all road blocker and bollard systems to advise all users of its position, and are supplied as standard. 100mm LED traffic light head can be pole or mounted on control cabinet
Totem Traffic Light System
Totem Traffic Light systems are optional and an upgrade to the standard Traffic Light system. Traffic Lights are highly recommended to be installed with all road blocker and bollard systems to advise all users of its position.
Traffic Light Cage
Vandal resistant traffic light cages
Accumulator
In the event of a power failure or sabotage, the accumulator can raise and lower the blocker/bollard for a number of predetermined operations. An accumulator is a self contained charged unit with battery backed control system.
Extra Fast Operation
Increases the products speed of operation to a few seconds. Dependent on configuration. Please contact Technical Sales for more information on 01293 422800
Manual Handpump
In the event of a power failure, a hand pump/release can be provided to enable the manual raising and lowering of the blocker/bollard.
Hand drill to operate manual hand pump
Hand drill to operate manual hand pump on a Rising Terra Bollard.
Vehicle Detector Loops
Vehicle detector loops installed beneath the road surface to detect vehicles. This will prevent the automatic equipment from closing on a vehicle within the aperture. Safety induction loops cut into the road surface. This will prevent the gate from closing on a vehicle within the aperture.
Safety Photocells
Safety Photocells produce beams of light which cross the road way to monitor vehicle and pedestrian movement. If an object breaks this beam, the automatic equipment will stop & reverse. On gate installations, two pairs of photocells are usually fitted. Ultra Sonic Sensors are also available.
High Security Cabinet
Provides high security protection to the control cabinet of Frontier Pitts IWA14 & PAS 68 Anti Terra product range. Special Security cabinets can be fitted and tested to BRE 1175 with 6 point security locking mechanism and fire resistance to DIN 4102. High security mauer key lock, Class A, ECBS/ENV 1300 approved, with similar rating to BS EN 1143-1 1997.
Anti Skid Paint
The Terra Bollard’s Top Plate can be fully coated with an anti skid resistant treatment which has been fully tested under laboratory conditions for at least 12 months
Stainless Steel Bollard Sleeves
Frontier Pitts have a portfolio of sleeves for our Planet range of HVM Terra Bollards. Options below include mitre and dome tops, different types of stainless steel finishes and the choice of colour bands and engraving.
Polyester Powder Coated Bollard Sleeves
Frontier Pitts have a portfolio of sleeves for our Planet range of HVM Terra Bollards. Polyester Powder Coated Sleeves pictured here with recessed banding
Stainless Steel Cabinet
As standard, the road blockers/bollards control cabinet is shotblasted and finish with a final coat of polyurethane paint. However a Stainless Steel finish is also available as an option.
Static Terra Bollards Accessories
Stainless Steel Bollard Sleeves
Frontier Pitts have a portfolio of sleeves for our Planet range of HVM Terra Bollards. Options below include mitre and dome tops, different types of stainless steel finishes and the choice of colour bands and engraving.
Polyester Powder Coated Bollard Sleeves/h3>
Frontier Pitts have a portfolio of sleeves for our Planet range of HVM Terra Bollards. Polyester Powder Coated Sleeves pictured here with recessed banding
Mitre Top
Stainless Steel Mitre Top. Available in five styles, including plain, single and double band designs
Semi Domed Top
Stainless Steel Semi Dome Top. Available in five styles, including plain, single and double band designs
Our bead blasting stainless steel finish achieves no pitting or distortion of the final surface. N.B. distortion is dependant on material thickness
Finish: Powder Coating
Powder coated paint finish in clients choice of RAL colour.
Reflective Banding
Another option for the finish of the bollard is reflective banding. The reflective banding can be deemed a necessity to ensure the bollard stands out from the architecture of the landscape and/or building. Bollard banding is available in a range of colours and dimensions, with option on the number of bands on the bollard, and position (top of bollard, top and bottom of bollard). The colour of the banding can also reflect the branding of the site company.
Personalised Engraving
In addition to reflective banding on the static bollards to incorporate the sites corporate brand image, Frontier Pitts can also provide corporate engraving on the stainless steel bollard sleeve.
Traffic Light System
Traffic Light Full Sign System
Lights in Blocker
Totem Traffic Light System
Cowled Switch
