Bi-folding Speed Gates
Bi-folding Speed Gates from Frontier Pitts
The popular Bi-folding Speed Gate is a fast acting security gate which is ideal for sites where there is a limited area for the gate to open and close.
Bi-folding gates are available in various models including overhead track, bottom track or trackless.
Manual or Automatic Bi-folding Gate models available.
Automatic Bi-folding Gates are powered by actuators. For our full range of actuators, please see our Actuator page
Bi-folding Gates Safety control systems: Vehicle detector loops, safety photocells, ultra-sonic sensors and safety edges are available. Accessories: Signage, audible alarms and flashing beacons.
Bi-folding Gates Access controls: A wide range of access control systems are available.
- Automatic Bi-folding Gate Maximum width: 10000mm
- Standard height: 2400mm
- Maximum height: 5000mm, depending on configuration
- Bespoke available
Bi-folding Speed Gate Specifications
FeaturesBifolding Speed Gate |
Basic SpecsMore details |
Civil Engineering |
Dependent on Actuator. For more information please contact the Technical Sales Department on
01293 422800 or email: |
Electrical EngineeringIndustry standard electricals |
Electrical Requirements: Depending on Actuator and configuration |
Specifications subject to change and are dependant on product options. Please contact Frontier Pitts to request more information.
Photo Gallery
Accessories
Signage |
Warning and information signs are recommended to be installed with all automatic equipment to advise users of its operation |
Bi-folding Gate Warning Sign |
Indicates and warns users of the swing of a bi-folding gate during opening and closing |
|
Traffic Light systems can be installed with Automatic Gate systems to advise all users of its position. 100mm traffic light head can be pole or mounted on control cabinet |
Vehicle Detector Loops |
Vehicle detector loops installed beneath the road surface to detect vehicles. This will prevent the automatic equipment from closing on a vehicle within the aperture. Safety induction loops cut into the road surface. This will prevent the gate from closing on a vehicle within the aperture. |
Safety Photocells |
Safety Photocells produce beams of light which cross the road way to monitor vehicle and pedestrian movement. If an object breaks this beam, the automatic equipment will stop & reverse. On gate installations, two pairs of photocells are usually fitted. Ultra Sonic Sensors are also available. |
Gate Safety Edge |
Safety Edges are normally fitted to automatic gates. However they can also be installed beneath a barrier boom. Safety edges prevent the barrier lowering on a person or vehicle in the event it is activated. Safety edges are flexible strips which, if depressed, send a signal to the power source to stop. |
Automatic Bi-folding Gates |
For Automatic Gates, safety accessories and devices, please view the Actuator product page. |
Gate Infill |
Weldmesh should be clipped to the gates infill bars infill to prevent pedestrians putting their limbs through. Other infills include palisade pales, sheet and wood infills. For more information please Security Gate Infills page |
Sounder |
Sounders/Audible Alarms provide an audible warning that the automatic equipment is in operation. |
Flashing Beacon |
Flashing Beacons provide a visual warning that the automatic equipment is in operation. |
Traffic Light System