IWA 14 Ultra Shallow Terra Lunar Bridge Bollards 7.2t @ 30mph

IWA 14 7.2t @ 30mph – Shallow Static Terra Lunar Bridge Bollard

Frontier Pitts is excited to introduce our shallowest bollard yet requiring foundations of just 75mm which resulted in zero penetration when tested to IWA 14 stopping 7.2t at 30mph.

Bridges around the World are vital to our transportation network but have already been subjected to vehicle attacks by terrorists and users (cyclists and pedestrians) have become extremely vulnerable. Frontier Pitts have created a bollard bridge protection system that is able to sit within the bridge kerb structure utilising an ultra-shallow foundation of less than three inches.

The Terra Lunar Bridge Bollard system was impact tested to IWA 14 at Horiba MIRA. The system successfully stopped a 7.2t vehicle travelling at 30mph at a shallow attack angle of 30-degrees, resulting in minimal penetration. At time of print, this is the best result in the world from a bridge protection bollard system. This means the bollard system successfully protected the pathway and cycleway as there was no encroachment by the vehicle. The Terra Lunar Bollard system was not damaged after the impact test and remained fully upright.

The challenge of designing and installing a bollard system to protect a bridge has its own set of unique problems as the not only are the foundations extremely limiting, but the structural integrity of the bridge deck cannot be compromised. A unique articulated connection between the bollards using flexible linkages allows for bridge movement and expansion.

The Terra Lunar Bridge Bollard system is designed to fit lengths of pathways and pavements. Although designed to protect bridges, this ultra-shallow bollard solution can also be used for other inner-city areas, pathways, linear walkways and cycle lanes where there is limited foundation depth.

IWA 14-1 Static & Rising Bollards are required to be installed at 1200mm between upright bollard faces to meet IWA 14-2 guidelines.

Polyester Powder Coated as standard
For Sleeve options please see Accessories tab or the Bollard Sleeve page

  • 7.2t @ 30mph
  • Classification Codes: V/7200[N2A]/48/30:0.2
  • IWA14 Tested Height above concrete plinth: 960mm
  • Ultra Shallow Foundations of only 75mm, topping 30mm
    Benefits & Features

  • Minimal penetration
  • Anti-Terrorist Protection for Bridges or other Ultra Shallow installations
  • Bollards remained upright and intact after the crash test
  • Modular design for quick and easy installation
  • Designed for ease of maintenance
  • Crash tested with Decorative Top Sleeve
  • A unique articulated connection between the bollards using flexible linkages allows for bridge movement and expansion

IWA 14 Ultra Shallow Static Terra Lunar Bollard [email protected] Specifications

Features

The IWA 14 Ultra Shallow Static Terra Lunar Bollard 7.2t @ 30mph

    Basic Specs

  • IWA 14 Classification Code: V Static /7200[N2A]/48/30:0.2
  • Height above concrete plinth: 960mm
  • Diameter: 219mm diameter
  • More details

  • Construction: S355 structural steel plate is a high-strength low-alloy European standard structural steel
  • Ultra Shallow Foundation Depth 75mm, topping 30mm
  • Finish: Shotblasted, hot zinc sprayed (galvanised), primed and finished with a final coat of polyurethane paint.
  • Optional finish: 316 Stainless Steel Satin finish or bead blasted sleeves with dome or mitre tops. Other decorative sleeves available on request
  • Accreditations: Secured by Design

Civil Engineering

Ultra Shallow Foundation Depths 75mm

For more information please contact the Technical Sales Department on

01293 422800 or email:

[email protected]

Specifications subject to change and are dependant on product options. Please contact Frontier Pitts to request more information.

Product Video

 

Photo Gallery

Accessories

Stainless Steel Bollard Sleeves

Frontier Pitts have a portfolio of sleeves for our Planet range of HVM Terra Bollards. Options below include mitre and dome tops, different types of stainless steel finishes and the choice of colour bands and engraving.

Polyester Powder Coated Bollard Sleeves

Frontier Pitts have a portfolio of sleeves for our Planet range of HVM Terra Bollards. Polyester Powder Coated Sleeves pictured here with recessed banding

Mitre Top

Stainless Steel Mitre Top. Available in five styles, including plain, single and double band designs

Semi Domed Top

Stainless Steel Semi Dome Top. Available in five styles, including plain, single and double band designs

Finish: Satin Polished Stainless Steel

Satin–polished 320 grit (0.5 micron) stainless steel finish

Finish: Bead Blasted Stainless Steel

Our bead blasting stainless steel finish achieves no pitting or distortion of the final surface. N.B. distortion is dependant on material thickness

Finish: Powder Coating

Powder coated paint finish in clients choice of RAL colour.

Reflective Banding

Another option for the finish of the bollard is reflective banding. The reflective banding can be deemed a necessity to ensure the bollard stands out from the architecture of the landscape and/or building. Bollard banding is available in a range of colours and dimensions, with option on the number of bands on the bollard, and position (top of bollard, top and bottom of bollard). The colour of the banding can also reflect the branding of the site company.

Personalised Engraving

In addition to reflective banding on the static bollards to incorporate the sites corporate brand image, Frontier Pitts can also provide corporate engraving on the stainless steel bollard sleeve.

Frontier Pitts COVID-19 Statement.

Subscribe to our Newsletter
Get the latest news about our products
We respect your privacy, we will not spam you.