HVM Magnum Terra Gate

Bullet Resistant HVM Magnum Terra Gate

Introducing the BULLET RESISTANT HVM Terra Sliding Gate which has been successfully impact tested to the International IWA14 and British PAS68 specifications, stopping a 7.5 ton vehicle travelling at 50mph (80kph).

  • Maximum width: 3000mm
  • Variable heights available up to 2000mm
  • V/7500[N2]/80/90:1.5/0.0
  • V/7200[N2A]/64/90:1.8
  • V/7500[N3]/80/90:0.0/0.0
  • Bullet Resistant Dimensions: 3000mm wide x 2000mm high
  • Tested: 9mm Ball
  • 7.62 x 39 Nato Ball
  • 5.56 x 45 Nato Ball
  • 7.52 x 51Nato Ball

Bullet Resistant HVM Magnum Terra Gate Specifications

Features

Bullet Resistant HVM Magnum Terra Gate

    Basic Specs

  • Width: Variable up to 3000mm
  • Variable Heights: 2000mm
  • More details

  • Construction: The gate is a fully welded construction of steel sections including specially designed Frontier Pitts’ Steel Impact Beam with Bullet Resistant infills.
  • Foundation Type B
  • Finish: Shotblasted, hot zinc sprayed (galvanised), primed and finished with a final coat of polyurethane paint.
  • Options: UPS (Uninterrupted Power Supply), EFO (Extra Fast Operation), Disengaging Box – manual override, High Security Cabinet, Anti-tamper alarms
  • Safety: Safety-edges, Vehicle Detector Loops, Safety Photocells, LED Traffic ligh heads, Flashing beacon, Audible alarm
  • Normal Operating Speed/Time: 250mm per second Depending on configuration and subject to on site risk assessment to ensure the gate would comply with BS EN 12453
  • EFO Operating Speed/Time: 600mm/second Depending on configuration and subject to on site risk assessment to ensure the gate would comply with BS EN 12453
  • Duty Cycle: 100% duty rating
  • Controls: The programmable logic controller (PLC) with built in safety features will accept inputs from access control systems including access card, voice, etc. Push button as supplied as standard
  • Accreditations: Secured by Design, BRE Global

Civil Engineering

Shallow Foundation Depths of only 500mm

For more information please contact the Technical Sales Department on

01293 422800 or email:

[email protected]

Electrical Engineering

Industry standard electricals

Electrical Requirements: 230v single phase, earth and configuration

Specifications subject to change and are dependant on product options. Please contact Frontier Pitts to request more information.

 

Photo Gallery

Accessories

Signage

Warning and information signs installed on the barrier boom such as ‘STOP’ ‘NO EXIT’ and ‘NO ENTRY’

Pedestrian Warning Sign

Normally placed on the barrier cabinet. Warns pedestrian of the automatic barrier.

Traffic Light System

Traffic Light systems are highly recommended to be installed with all road blocker and bollard systems to advise all users of its position. 100mm traffic light head can be pole or mounted on control cabinet

Vehicle Detector Loops

Vehicle detector loops installed beneath the road surface to detect vehicles. This will prevent the automatic equipment from closing on a vehicle within the aperture. Safety induction loops cut into the road surface. This will prevent the gate from closing on a vehicle within the aperture.

Safety Photocells

Safety Photocells produce beams of light which cross the road way to monitor vehicle and pedestrian movement. If an object breaks this beam, the automatic equipment will stop & reverse. On gate installations, two pairs of photocells are usually fitted. Ultra Sonic Sensors are also available.

Gate Safety Edge

Safety Edges are normally fitted to automatic gates. However they can also be installed beneath a barrier boom. Safety edges prevent the barrier lowering on a person or vehicle in the event it is activated. Safety edges are flexible strips which, if depressed, send a signal to the power source to stop.

Pedestrian Guard Rail

A Pedestrian Guard Rail (fence panels) should be fitted around the runback area of the sliding gate. This is to prevent serious injury to a person should they stray into that area whilst the gate is operating.

Gate Infill

Weldmesh should be clipped to the gates infill bars infill to prevent pedestrians putting their limbs through.
Other infills include palisade pales, sheet and wood infills. For more information please Security Gate Infills page

Sounder

Sounders/Audible Alarms provide an audible warning that the automatic equipment is in operation.

Flashing Beacon

Flashing Beacons provide a visual warning that the automatic equipment is in operation.

UPS – Uninterrupted Power Supply

In the event of a power failure or sabotage an interrupted power supply system can open and close the Terra Gate for a number of predetermined operations is available.

Extra Fast Operation

Increases the products speed of operation to a few seconds. Dependent on configuration. Please contact Technical Sales for more information on 01293 422800

High Security Cabinet

Provides high security protection to the control cabinet of Frontier Pitts PAS 68 Anti Terra product range. Special Security cabinets can be fitted and tested to BRE 1175 with 6 point security locking mechanism and fire resistance to DIN 4102. High security mauer key lock, Class A, ECBS/ENV 1300 approved, with similar rating to BS EN 1143-1 1997.

High Security Cabinet

Provides high security protection to the control cabinet of Frontier Pitts PAS 68 Anti Terra product range has been approved to Security Rating 2. Special Security cabinets can be fitted and tested to BRE 1175 with 6 point security locking mechanism and fire resistance to DIN 4102. High security mauer key lock, Class A, ECBS/ENV 1300 approved, with similar rating to BS EN 1143-1 1997.

Frontier Pitts COVID-19 Statement.

Subscribe to our Newsletter
Get the latest news about our products
We respect your privacy, we will not spam you.