Terra Swing Gate with Security Infill to create the Terra Hinged Gate

PAS 68 – 7.5t @ 50mph

The Terra Hinged Gate is the enhanced version of the PAS 68 Terra Swing Gate which was successfully impact tested to PAS 68 stopping a 7.5t vehicle travelling at 50mph (80kph), which equates to 1852kJ.

The PAS 68 manual or automatic Hinged Gate leaf with the heavy duty impact crash beam and heavy duty support posts of the Terra Swing Gate. Various infills available including fully welded vertical bar and high security 358 welded mesh infill to BS 1722 Part 10 and 14.

The Terra Hinged Gate can be automated with our range of Trojan Actuators or Gate Back Actuators. Please contact the Technical Sales Department on 01293 422800 or [email protected] for more information.

Designed for easy installation and maintenance.
The Terra Hinged Gate can be interfaced to any access control systems.

  • Maximum width: 5000mm
  • Standard height: 2400mm
  • Based on the Terra Swing Gate PAS 68 Tested dimensions: Width 3500mm, crash beam height 1000mm

PAS 68 Terra Hinged Gate 7.5t@50mph Specifications

Features

The PAS 68 Terra Hinged Gate – 7.5t @ 50mph

    Basic Specs

  • PAS 68 Classification Code: V Swing Gate 7500[N3]/80/90:0.0/25.0
  • Based on the Terra Swing Gate PAS 68 Tested dimensions: Width 3500mm, crash beam height 1000mm
  • Standard height: 2400mm
  • Width: Variable up to 5000mm
  • More details

  • Construction: The gate is a fully welded construction of steel sections including specially designed Frontier Pitts’ Steel Impact Beam. Various infills are available including fully welded vertical bar and high security 358 welded mesh infill to BS 1722 Part 10 and 14. The gate leaf is to be designed to accept a wide range of decorative or protective infill which can be added without changing the impact resistance of the gate.
  • Foundation Type B
  • Finish: Shotblasted, hot zinc sprayed (galvanised), primed and finished with a final coat of polyurethane paint.
  • Options: Accumulator – allows a number of operations in power failure mode, Manual Hand pump, High Security Cabinet, Anti-tamper alarms
  • Safety: Safety-edges, Vehicle Detector Loops, Safety Photocells, LED Traffic ligh heads, Flashing beacon, Audible alarm
  • Normal Operating Speed/Time: 6 – 15 seconds. Depending on configuration
  • Duty Cycle: 100% duty rating
  • Controls: The programmable logic controller (PLC) with built in safety features will accept inputs from access control systems including access card, voice, etc. Push button as supplied as standard
  • Accreditations: Secured by Design, BRE Global

Civil Engineering

Dependent on type of Automation. For more information please contact the Technical Sales Department on

01293 422800 or email:

[email protected]

Electrical Engineering

Industry standard electricals

Electrical Requirements: Dependent on Actuator and configuration

Specifications subject to change and are dependant on product options. Please contact Frontier Pitts to request more information.

Product Video

 

Photo Gallery

Accessories

Signage

Warning and information signs are recommended to be installed with all automatic equipment to advise users of its operation

Hinged Gate Warning Sign

Indicates and warns users of the swing of a hinged gate during opening and closing

Traffic Light System

Traffic Light systems can be installed with Automatic Gate systems to advise all users of its position. 100mm traffic light head can be pole or mounted on control cabinet

Vehicle Detector Loops

Vehicle detector loops installed beneath the road surface to detect vehicles. This will prevent the automatic equipment from closing on a vehicle within the aperture. Safety induction loops cut into the road surface. This will prevent the gate from closing on a vehicle within the aperture.

Safety Photocells

Safety Photocells produce beams of light which cross the road way to monitor vehicle and pedestrian movement. If an object breaks this beam, the automatic equipment will stop & reverse. On gate installations, two pairs of photocells are usually fitted. Ultra Sonic Sensors are also available.

Gate Safety Edge

Safety Edges are normally fitted to automatic gates. However they can also be installed beneath a barrier boom. Safety edges prevent the barrier lowering on a person or vehicle in the event it is activated. Safety edges are flexible strips which, if depressed, send a signal to the power source to stop.

Automatic Hinged Gates

For Automatic Gates, safety accessories and devices, please view the Actuator product page.

Gate Infill

Weldmesh should be clipped to the gates infill bars infill to prevent pedestrians putting their limbs through.
Other infills include palisade pales, sheet and wood infills. For more information please Security Gate Infills page

Sounder

Sounders/Audible Alarms provide an audible warning that the automatic equipment is in operation.

Flashing Beacon

Flashing Beacons provide a visual warning that the automatic equipment is in operation.
Subscribe to get the latest news about our products
We respect your privacy, we will not spam you.