Frontier Pitts      Products      Gates      LPS1175 Security Rated Gates      LPS 1175 Platinum Double Hinged Gate SR1, SR2 & SR3

LPS 1175 Platinum Double Hinged Gate SR1, SR2 & SR3

LPS 1175 Platinum Double Hinged Gate

LPS 1175 Platinum Double Hinged Gate, Security Rated

The LPS1175 Security Rated Platinum Hinged Gate is a double leaf security gate which is ideal for sites where there is a limited area for the runback of a sliding gate. The gate has successfully withstood attack from forced entry to Security Rating 1 (A1) for 1 minute, Security Rating 2 (B3) for 3 minutes and Security Rating 3 (C5) for 5 minutes.

The LPS1175 Security Rated Platinum Hinged Gate are powered with either Dutyman or Trojan Actuators depending on the duty and size of gate.

Hinged Gates Safety control systems: Vehicle detector loops, safety photocells, ultra-sonic sensors and safety edges are available. Accessories: Signage, audible alarms and flashing beacons.

Hinged Gates Access controls: A wide range of access control systems are available.

Please click here to view the choice of Security Rated Gate Infills

  • The LPS 1175 Platinum Double Hinged Gate maximum width 10,000mm
  • Standard height: 2400mm
  • Maximum height: 4000mm
  • Bespoke available
  • Secured by Design
  • Red book Listing

Contact Technical Sales



View Case Studies

Product Brochure

Data Sheet

Drawing

Photos & Videos

LPS 1175 Platinum Double Hinged Gate Specifications

Features

The LPS 1175 Platinum Double Hinged Gate Specifications

    Basic Specs

  • LPS 1175 Platinum Double Hinged Gate max width: 10,000mm
  • Standard Height: 2400mm
  • Maximum Height (depending on width): 4000mm
  • Bespoke available
  • LPCB LPS1175: Issue Intruder Resistant to forced entry Security Rating A1 (SR2), B3 (SR2) and C5 (SR3)

    • More details

  • Construction: The gate leaf is a fully welded construction of rectangular hollow section, low carbon steel to BS4848 Pt.2. Combination of vertical ERW bar infill backed with galvanised weld mesh, painted to match Standard colour range: Any colour in the RAL colour range
  • Finish: Shotblasted, hot zinc sprayed (galvanised), primed and finished with a final coat of polyurethane paint.
  • Options: Accumulator (allows a number of operations in power failure mode), High Security Cabinet, Anti-tamper alarms
  • Safety: Safety-edges, Vehicle Detector Loops, Safety Photocells, Flashing beacon, Audible alarm Normal
  • Operating Speed/Time: 6 -15 seconds Depending on configuration
  • Duty Cycle: 100% duty rating
  • Controls: The programmable logic controller (PLC) with built in safety features will accept inputs from access control systems including access card, voice, etc. Push button as supplied as standard
  • Accreditations: Secured by Design, BRE Global

Civil Engineering

Dependent on actuator

 For more information please contact the Technical Sales Department on

01293 422800 or email:

[email protected]

Electrical Engineering

Industry standard electricals

 Typically single phase supply 16amp, 3wire, 230V, 50Hz
Specifications subject to change and are dependant on product options. Please contact Frontier Pitts to request more information.

 

Product Video

Photo Gallery

Accessories

Sign

Signage

 Warning and information signs are recommended to be installed with all automatic equipment to advise users of its operation
Sign

Hinged Gate Warning Sign

 Indicates and warns users of the swing of a hinged gate during opening and closing

Traffic LightTraffic Light System

 Traffic Light systems can be installed with Automatic Gate systems to advise all users of its position. 100mm traffic light head can be pole or mounted on control cabinet
Loops

Vehicle Detector Loops

 Vehicle detector loops installed beneath the road surface to detect vehicles. This will prevent the automatic equipment from closing on a vehicle within the aperture. Safety induction loops cut into the road surface. This will prevent the gate from closing on a vehicle within the aperture.
Photocells

Safety Photocells

 Safety Photocells produce beams of light which cross the road way to monitor vehicle and pedestrian movement. If an object breaks this beam, the automatic equipment will stop & reverse. On gate installations, two pairs of photocells are usually fitted. Ultra Sonic Sensors are also available.
Safety Edge

Gate Safety Edge

 Safety Edges are normally fitted to automatic gates. However they can also be installed beneath a barrier boom. Safety edges prevent the barrier lowering on a person or vehicle in the event it is activated. Safety edges are flexible strips which, if depressed, send a signal to the power source to stop.
Actuator

Automatic Hinged Gates

 For Automatic Gates, safety accessories and devices, please view the Actuator product page.
Infill

Gate Infill

 Weldmesh should be clipped to the gates infill bars infill to prevent pedestrians putting their limbs through.
Other infills include palisade pales, sheet and wood infills. For more information please Security Gate Infills page
Sounder

Sounder

 Sounders/Audible Alarms provide an audible warning that the automatic equipment is in operation.
Beacon

Flashing Beacon

 Flashing Beacons provide a visual warning that the automatic equipment is in operation.
Subscribe to get the latest news about our products
We respect your privacy, we will not spam you.