| Bi-Folding
gates are the latest addition to the range of electrically operated
vehicle gates manufactured by Frontier-Pitts. These gates are
fast-acting, and provide a high level of security on premises
such as police stations, prisons, airports, cash handling depots
and local authority buildings. Manufactured in widths up to 8000mm
and heights of 6000mm, the gates have a variety of safety options
including electric safety edges, vehicle detector loops and traffic
light systems. |
Additional safety features
include gate top protection, locking bolts, audible alarms and flashing
beacons.
Maximum
height |
6000mm |
Maximum
width |
8000mm
per gate leaf. However bespoke gates are available |
Construction |
Posts:
Rolled Hollow Sections (RHS)
Top section H beam or steel section clad with Zintec sheet
Gateleaf frames: 100mm x 200mm RHS
Hinges are size-dependent, minimum 25mm stainless steel with sealed
oil filled bearings. Gate infill minimum 25 x 25 mm, size-dependent. |
Finish |
Shotblasted
to clean metal, hot-dipped galvanised or coated with 100 microns
of zinc.
A special 3-part coating system with polyurethane top coat -
typical first time maintenance of 20 years. |
Safety |
Gates
always supplied with failsafe protection on leading edges.
Additional safety such as photocells, interactive IR detectors
or magnetic loops can be provided. |
Drive
unit |
Underground
hydraulic or top mounted electro-mechanical. |
Operating
speed |
Drive
dependent: 300mm/sec to 1200mm/sec |
Controls |
Microprocessor
controlled drive unit which can interface to any standard control
system, i.e. card reader etc. |
Power |
3
phase 15 A 400 V +/- 10% or 1 phase 10 A 220 V +/- 10%, both
50/60 Hz |
Operating
temperature |
-25
to +55 degrees Centigrade |
Mechanical
life |
(MCBF)
1 x 106 |
Fixing |
Size
dependent, full fixing details available |
|